Need some more anti-fog in your life? Use Fog-X DIY films to defog anything!
Use on:
- 8 x 7in size
- Car mirrors
- Watches
- Glasses
- Bathroom, makeup, fridge mirrors
- Windows
- Safety shields
- Mask face protector
- Eye protector visors
- And anything else you can come up with!
Instructions
-
Cut to size if needed
- Use included download stencil designs as a guide
- Reverse Fog-X film side to make Right/Left copies
- Clean the surface you want to be fog free (must be flat or flat-ish)
- Spray water on the surface BEFORE sticking the film on to reduce bubble formation
-
Peel off the blue AND clear protective layers. This will leave you a clear film with adhesive on one side and the anti-fog layer on the other.
- Sticky side down
- Press out any bubbles with included squeegee.
- ENJOY!!
FAQ:
Are the films blue or clear?
Clear. There are protective films on both sides of the inserts that need to be removed with the pull tabs. One of these films is blue, but should be off by the time you are ready to swim, leaving a clear insert.
How long does the anti-fog effect last?
Over a year!
Things still fog up!
Make sure to hydrate the film before using with a drop of water. Rub the water into the film.
Can I clean my Fog-X film?
Yes! Just make sure to rinse these out well with fresh water so the residue does not cover up the Fog-X magic.
Can I use with prescription lenses?
Yes, up to +2 and -2 diopters.
Can I peel it off and replace it?
Sure. You won't need to, but you could. The adhesive is silicone based and leaves no residue on your goggles. If you need to replace them, simply peel them off and stick new ones in.