How can you see all those pretty fishies through all that fog?! Now you can! Find the style that fits your dive or snorkel mask, follow the instructions, and have fun fog free forever!
Instructions
- Choose a style that best fits your mask. See sizing chart and dimensions here.
- Clean your mask (NO BURNING or TOOTHPASTE NECCESSARY!)
- Cut the film to size if needed.
- Peel off the blue AND clear protective layers. This will leave you a clear film with adhesive on one side and the anti-fog layer on the other.
- Stick inside the mask.
- Press out any bubbles with included squeegee.
- Add water before diving to hydrate the film.
- ENJOY!!
Testimonials and Tutorials!
FAQ:
Are the inserts blue or clear?
Clear. There are protective films on both sides of the inserts that need to be removed with the pull tabs. One of these films is blue, but should be off by the time you are ready to swim, leaving a clear insert.
Do I need to burn or toothpaste scrub my new mask?
NO! Those days are over! Fog-X can go straight in a new mask without any prep. And besides, burning your mask can weaken the glass and make it shatter under water.
Does the insert fit any dive mask?
Yup. Choose the size that matches your mask. Worst case scenario, you may need to cut the film to size. A rim of fog may develop around the insert, but this is usually unnoticeable.
How long does the anti-fog effect last?
Over a year!
My mask still fogs up!
Make sure to hydrate the film before using with a drop of water. Rub the water into the film.
Can I hydrate the film with pool water, salt water or fresh water?
Yes, yes and yes!
Can I clean my mask and Fog-X film?
Yes! Soap, vinegar, and baking soda are all ok. Just make sure to rinse these out well with fresh water so the residue does not cover up the Fog-X magic.
Can I still use spit, defog or baby shampoo?
Yes, but those liquids will cover up the special properties of Fog-X film and keep it from working, so we recommend only using water.
Can I use with prescription lenses?
Yes, up to +2 and -2 diopters.
Can I cut out a piece for my bifocal?
Of course! Just trim what you need and stick one piece of Fog-X on the "see-er" and one on the regular portion of the dive mask. Alec in the above video does this.
Can I peel it off and replace it?
Sure. You won't need to, but you could. The adhesive is silicone based and leaves no residue on your goggles. If you need to replace them, simply peel them off and stick new ones in.
What design will work in my mask?
Took my ScubaPro Frameless down into the cool waters of Lake Tenkiller, armed with FogX inside. Zero fogging, zero distortion, 100% clarity the entire time. If I had any complaint, it would be that I wasn't sure which size to get and the small one piece left too big of a gap between the nose and where the film started. Hindsight being what it is, I'll go with the large next time and trim to fit. 10/10 Would recommend.
crystal clear vision
It did prevent a little of the fog I had, but now I also have tiny droplets of water in the mask
I really thought I just threw away some money, but you never know. I figured it was worth a shot. I can report back that they were great! I’m not sure if I missed it in the directions, but I wish they told you if the blue or the clear side went towards your mask face, but I found a YouTube video to explain it. I will order more and definitely recommend!
I used the sizing chart to purchase the correct size. It went in easily and works absolutely amazingly where it covers the glass. The only issue is that it does not fit the mask very well. The area around the nose has about a 1/16" to 1/8” gap. That gap is right where I look and is irritating. Other than that, it is a great product. If the fitment was better, it would be seemingly perfect.